MD 421-II
Robuste et légendaire microphone cardioïde, extrêmement polyvalent. Manipulation facile grâce à sa directivité prononcée. Reproduction nette du son Pour la plupart des conditions d'enregistrement et applications de radiodiffusion. Cinq positions de contrôle des basses.

399,00
TVA incluse – Livraison gratuite
MD 421-II
N° d’article 000984
MD 421-II
399,00
TVA incluse – Livraison gratuite

Le MD 421 II fait partie des références mondiales en matière de microphones. Ses qualités sonores permettent de l’utiliser dans les circonstances de prises de son les plus diverses et dans tous les domaines de la technique de transmission sonore. Son atténuateur de graves à 5 paliers ajoute à son universalité. Couleur : noir ; grille: acier spécial, noir.

  • Très solide et résistant

  • Atténuateur de graves à 5 paliers

  • Bonne suppression des réactions acoustiques

  • Reproduction sonore transparente

  • Manipulation aisée grâce à la directivité prononcée

Avis
Be the first to write a review.

Spécifications
Qu'y a-t-il dans la boite
  • 1 MD 421 II
  • 1 fixation de pied, filet 3/8"
Accessoires

Assistance
Nous contacter
Product Support Phone

01 49 87 03 07


FAQ
  • Does the MD 421-II require 48V Phantom Power?

    The MD 421-II is a dynamic microphone and does not require 48V Phantom Power to operate.



  • Will the presence of 48V Phantom Power affect the MD 421-II?
    The MD 421-II does not require 48V Phantom Power to operate however the presence of 48V Phantom Power should not adversely affect the operation of the MD 421-II.

  • What is the maximum Sound Pressure Level (SPL) for the MD 421-II?

    It is a common saying that dynamic microphones just have no maximum SPL.

    This saying is not technically exactly correct but for every day use of dynamic microphones you will not find gain limitations. At SPL levels above 160 dB some mechanical problems might occur (for example the voice coil might crash onto the magnet) but these SPL levels are very hard to find in real world.

    Here at Sennheiser we use dynamic microphones for distortion measurements on loudspeakers at very high sound pressure levels. At Sennheiser we have measured the SPL and THD inside a large 2" driver/horn combination with a MD 421. The max SPL this combination was able to produce was 150 dB and the THD level recorded by a MD 421 was below 1% (produced by the driver not by the mic)

    So as a conclusion we can state the MD 421-II has no maximum SPL limitations for practical use. However if using dynamic microphones at high SPL levels a user should be aware that the very high voltage (up to several volts) delivered by the microphone might cause problems when connected to mic preamps.

Téléchargement

  • Architects Specifications
    • Architect´s specification (18 KB) Download

  • Déclaration UE de conformité
    • Déclaration UE de conformité MD Series (230 KB) Download

  • Misc
  • High Resolution Images
  • Notice d'emploi
    • Notice d'emploi MD 421 II (300 KB) Download

  • Spec Sheets

  • Produits compatibles